Approx. Rs 18,500 / PieceGet Latest PriceProduct BrochureProduct Details:
|Minimum Order Quantity||1 Piece|
|Relay rating||230V AC, 1A, Resistive load|
|No. of relay availability||Maximum 12|
|Relay Status||Yes, LED for each individual Relay|
|No. of Keys||Five|
|Voice recording||Yes, Recordable through RJ11 Connector.|
|Maximum no. of contacts||Up to 20 contacts|
|Dimension L x W x H (mm)||210 x 190 x 95|
|Panel Cutout (mm)||184x92+0.5|
TCP/IP protocol has become almost default preference when it comes to networking of the devices. The biggest advantage of TCP/IP is relatively easy availability of network devices and trained work force. With MODBUS over TCP/IP, it has become very easy to connect, control and monitor devices through central software.
The ERC-800 series TCP/IP Scanner of Ethernet based remote relay and display units is very helpful when you want to add remote alarm units on Ethernet network. Since it is Ethernet based, the device can be plugged in at any place and controlled easily from the control room.
This along with G-Tek’s networked software GtekNet, you can send the information about alarm condition being generated from any device to this unit along with the message on the display. The messages and relays on/off are fully configurable from software. Device operates on MODBUS TCP/IP so you can easily integrate with your existing system also. A buzzer is provided and can be set or reset remotely to attract the attention of the nearby person. It can be turned off for the pre-set time. User can also choose the add-on GSM module.
In case of pre-defined event (user configurable) this module will send voice or message to the user settable mobile numbers. Logs of successful sending or failure can also be downloaded for future reference.
Explore More Products